ALUMINIUM

At Virgolam, we offer quality, design, systems and environmental commitment with our range of aluminium products. We are a renowned Aluminium plate manufacturer and other aluminium products with customers all across the globe. Our wide range of aluminium products includes Rolled Sheets, Rolled Coils, Building Sheets, Closure Stock, Chequered Plates and Caul Board Sheet. Each product is packed meticulously and has quite versatile applications. They can be used from commercial purpose and indoor, outdoor application to, false ceiling, roof-on-roof roofing, bus flooring, cabins etc.

Aluminum Sheet Supplier & Manufacturers

Packing

Cold rolled sheets are wrapped in HDPE and placed on wooden pallets which have runners along and across the length of the sheet. An angle board is attached to the edges for edge protection, plyboard is placed on the top and bottom of the stack and the package is strapped with hoop iron straps. Silica gel packets are used for moisture protection.

Applicable Standards

ASTM – B -209M, Aluminium association – aluminium standards and data, Bureau of Indian Standards.

Applications

  • Commercial
  • Industrial engineering
  • Transport - road, rail
  • Building and construction
  • Fan blades
  • Electrical engineering
  • Home Appliances
Dimensions
Parameter Range Standard Tolerance
for 0.16 to 0.29+/-0.01
for 0.30 to 0.71 +/-0.05
for 0.72 to 1.40 +/-0.08
for 1.41 to 2.00 +/-0.11
Thickness (mm) 0.65-3.22 - for 2.01 to 3.00 +/-0.12
+/-3 for width < - 1000
+/-4 for width > 1000
Width (mm) 610-1450 915, 1220 +3/- for thickness > 1.63
+4/- for length < = 1000
24400 for thickness <0.7, +/-5 for length 2000-3000
Length (mm) 3658 max for >0.7 2440, 3048 +/- for length > -3000
Interleaved sheets can be supplied in >0.65mm with polythene or self-adhesive film. Stucco embossed coils are also available in the thickness range of 0.80-0.91mm
MECHANICAL PROPERTIES
UTS(mpa) %E (min)(50mm gauge length)
Alloy (AA) Temper Min Max 0.5-0.8mm 0.81-1.3mm 1.30-2.6mm 2.61-3.00mm
1200, 1100 0 70 110 20 25 29 30
1200, 1100 H14 105 140 3 4 5 5
1200, 1100 H16 125 150 2 3 4 4
3103, 3003 0 90 130 20 23 24 24
3103, 3003 H14 130 180 3 4 5 5
3103, 3003 H16 150 195 2 3 4 4
3103, 3003 H18 170 - 2 2 3 3
3105 0 95 145 14 14 15 16
3105 H14 150 200 4 4 5 5
3105 H16 175 215 2 2 3 4
3105 H18 195 - 1 1 1 2
8011 0 85 120 20 23 25 30
8011 H14 125 160 3 4 5 5
8011 H16 150 180 2 3 4 4
8011 H18 175 - 2 2 3 3
Chemical Composition
Alloy (%) AA 1050 AA 1100 AA 1200 AA 3003 AA 3103 AA 3105 AA 8011
Fe 0.40 0.95 1.00 0.70 0.70 0.70 0.60-1.00
Si 0.25 (Fe+Si) (Fe+Si) 0.60 0.50 0.6 0.50-0.90
Mg 0.05 - - - 0.30 0.20 -0.80 0.05
Mn 0.05 0.05 0.05 1.0-1.50 0.9 - 1.50 0.30 -0.80 0.20
Cu 0.05 0.05 - 0.20 0.05 0.05 - 0.20 0.10 0.30 0.10
Zn 0.05 0.10 0.10 0.10 0.20 0.25 0.20
Ti 0.30 - 0.05 0.1(Ti+Zn) 0.1(Ti+Zn) 0.10 0.08
Cr - - - 0.10 0.10 0.05
Each (others) 0.03 0.05 0.05 0.05 0.05 0.05 0.05
Total (others) - 0.15 0.125 0.15 0.15 0.15 0.15
Al 99.50 99 99 Reminder Reminder Reminder Reminder

Packing

The coils are packed in eye-to-sky or eye-to-wall position, wrapped in HDPE and hardboard, strapped with hoop iron and placed on wooden pallets. Moisture protection is provided by silica gel packets.

Applications

  • Commercial Use
  • General Engineering Applications
  • Bus cabins and bodies
  • Insulation
  • Cladding in buildings false ceilings and paneling (mill finish coils)
  • Electrical busbar ducting, transformer strips, etc.
Dimensions
Parameter Range Standard Tolerance
for 0.15 to 0.29 +/-0.01
for 0.30 to 0.71 +/-O.05
for 0.72 to 1.40 +/-O.08
for 1.41 to 2.00 +/-0.11
Thickness (mm) 0.15 - 3.00 - for 2.01 to 3.00 +/-0.12
Width (mm) 305-1450 915, 1220, 1250 Slit coil: +2.-0
I.D (mm) 508,200 - -
Coil Weight 2.5 MT max 250Kgs, 500Kgs, 1MT -
Stucco embossed coils are also available in the thickness range of 0.80-0.91mm
MECHANICAL PROPERTIES
UTS(mpa) %E (min)(50mm gauge length)
Alloy (AA) Temper Min Max 0.50-0.80mm 0.80-1.30mm 1.30-2.60mm 2.60-3.00mm
1050 0 55 95 22 25 29 30
1050 H14 95 125 4 5 6 6
1050 H18 125 - 3 3 4 4
1200, 1100 0 70 110 20 25 29 30
1200, 1100 H14 105 140 3 4 5 5
1200, 1100 H16 125 150 2 3 4 4
1200, 1100 H18 140 - 2 2 3 3
3103, 3003 0 90 130 20 23 24 24
3103, 3003 H14 130 180 3 4 5 5
3103, 3003 H16 150 195 2 3 4 4
3103, 3003 H18 170 - 2 2 3 3
Chemical Composition
Alloy (%) AA 1050 AA 1200 AA 3003 AA 3103 AA 3105 AA 8011
Fe 0.40 1.00 0.70 0.70 0.70 0.60-1.00
Si 0.25 (Fe+Si) 0.60 0.50 0.6 0.50-0.90
Mg - - - 0.30 0.20 -0.80 0.05
Mn 0.05 0.05 1.0-1.50 0.9 - 1.50 0.30 -0.80 0.20
Cu 0.05 0.05 0.05 - 0.20 0.10 0.30 0.10
Zn 0.05 0.10 0.10 0.20 0.25 0.20
Ti 0.30 0.05 0.1(Ti+Zr) 0.1(Ti+Zr) 0.10 0.08
Cr - - - 0.10 0.10 0.05
Each (others) 0.03 0.05 0.05 0.05 0.05 0.05
Total (others) - 0.125 0.15 0.15 0.15 0.15
Al 99.50 99 Reminder Reminder Reminder Reminder
Single number indicates maximum content

LENGTH

We can provide up to 6000 mm maximum. Other lengths may be provided on request.

FINISH

We provide roofing sheets in Mill finish only.

Applications

  • Cladding for roofs and walls
  • Industrial buildings, warehouses, aircraft hangers
  • Indoor and outdoor stadiums
  • Insulation and protection of fuel storage tanks and industrial boilers
  • Wall panels for high-rise buildings
  • Residential roofing
  • Roof-on-roof roofing
  • Exhibition pavilions
  • Poultry farms
  • False ceilings
Physical Properties
UTS(mpa)
Alloy (AA) Temper MIN MAX Yield stress (0.2% proof stress) Elongation %
3003 H18 170 - 165 1
3005 H18 190 - 165 1
8011 H18 175 - 165 2
Width
Circular Corrugated Overall Effective
Type-l 914 760
Type-Il 1200 988
Type-III 1250 1064
Chemical Composition
Alloy (AA) AI Cu Mg Si Fe Mn Zn Ti Cr Remarks
0.60 0.60
- -
8011 Remainder 0.20 0.10 0.95 0.95 0.10 0.20 0.20 0.20 -
0.80
-
3003 Remainder 0.10 0.10 0.60 0.70 1.20 0.20 0.20 - -
0.20
- 0.2 -
3105 Remainder 0.30 0.80 0.60 0.70 0.8 0.40 0.10 0.20 -
Other Typical Properties
Circular corrugated sheet Industrial troughed sheets
0.30 - 1.00 mm 0.40 - 1.00 mm

Packing

Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection

Alternatively, they are wrapped in a poly-laminated gunny or polythene, strapped with a hoop iron strap and clip and placed on a wooden pallet. Edge guards are used to protect the sheets.

Coil: Coil is placed on wooden pallets in either eye-to-sky or eye-to-wall condition, wrapped in HDPE fabric and hardboard, and strapped with hoop iron. Silica gel packets are used for moisture protection.

Applications

  • Pilfer-proof caps
  • Vial seals
Alloy
Alloy (%) AA 8011
Fe 0.6 - 1.0
Si 0.5 - 0.9
Mg 0.05
Mn 0.20
Cu 0.10
Zn 0.10
Ti 0.08
Cr 0.05
Each (others) 0.05
Total (others) 0.15
Al Remainder
MECHANICAL PROPERTIES
UTS(mpa)
Alloy (AA) Temper MIN MAX %E(min) (at 50mm gauge length)
8011 O 8.5 12 15
H14 125 170 1
H24 125 160 1
Dimensions Parameter
Dimensions Parameter Range Standard Tolerance
Thickness (mm) 0.14 0.25 0.18, 0.20 +0.005/-0.01
Width (mm) 610 - 1425 870 +2,-0
Length (mm) 400 - 1000 - +2,-0
Coil sizes (mm) ID: 200, 508 - -
Coil density (kg/mm) 1.5 max - -
Offer for thickness and width outside request the range may be quoted on specific request

Packing

Virgo’s Chequered sheets are packed with a poly-laminated gunny, hardboard, strapped with hoop iron and clip, and placed on a pallet.

Applications

  • Flooring for Buses
  • Decorative applications like interior paneling for trucks
  • Cabins etc.
Alloy
Alloy (%) 3105
Fe 0.70
Si 0.60
Mg 0.20 - 0.80
Mn 0.30 - 0.80
Cu 0.3
Zn 0.25
Ti 0.10
Cr 0.10
Each (others) 0.05
Total (others) 0.15
Al Remainder
Mechanical Properties
Alloy (AA) Temper
3105 F (As rolled)
Dimensions
Parameter Range Standard Tolerance
Thickness (mm) 0.45 - 3.00 mm (Base thickness) - +/-5%
813, 915 +/-3 for width < 1000
Width (mm) 813 - 1220 1220 +/-4 for width > 1000
+/-3 for width < 1000
+/-4 for width 1000 - 2000
+/-5 for width 2000 - 3000
4270 max +/-7 for width -3000
3105 < = 8 when length 1000 - 2000
<= 10 when length 2000 - 3000
Length (mm) <= 14 when length> 3000 2438, 3660,4270

Packing

Virgo’s Caul Board sheets are packed with a masking film, hardboard, strapped with hoop iron and clip, and placed on a pallet.

Quality System Certification

We are ISO: 9001 and 14001 certified Company.

Quality Assurance

VIRGO’s laboratory is equipped with latest technology analyzing equipment’s.

Applications

  • For Plywood
  • For Laminate Industry
Alloy
Alloy (%) 3105
Fe 0.70
Si 0.60
Mg 0.20 - 0.80
Mn 0.30 - 0.80
Cu 0.3
Zn 0.25
Ti 0.10
Cr 0.10
Each (others) 0.05
Total (others) 0.15
Al Remainder
Mechanical Properties
Alloy (AA) Temper
3105 F (As rolled)
Dimensions
Parameter Range Standard Tolerance
Thickness (mm) 2.50 mm - +*-5%
Width (mm) 1321 1321 +/-4 for widgh: 1000
+/-5 for width 2000-3000
2540
Length (mm) ==10 when length 2000-3000 2032, 2540

Catalogues

Aluminium